PRODUCT CATEGORIES
Reverse Sensor Systems:
    > cars and small trucks
    > pickup trucks and RVs
    > commercial fleets/towing
  Basic Audible Backup Sensor System
  with Optional LED Display Available
 
best reverse sensor pic

DT104:
Basic Audible Backup Sensor System with Optional LED Display Available

Ideal for cars, SUV's, and vans in which customers want a backup parking sensor system with an audible only alarm

buy backup sensor now
Product Specifications   Product Manual   Installation Instructions   Painting Instructions
 
Availability: Usually ships in 1-2 business days.
 

DT-104 Model backup sensor:
The DT-104 model backup sensor is designed to work on all passenger cars, small to midsize SUVs and mini vans.

DT104 components

DT-104 buzzer
DT104 sensor pic

Product Introduction
The audible only backup parking sensor system alerts the driver to the distance of obstacles behind the vehicle while reversing. It comprises of 4 sensors, a central control processor and a buzzer. The buzzer produces on audible warning inside the vehicle.

How it Works
• When reversing, the 4 rear sensors that are installed on back bumper send ultrasonic waves that detect obstacles behind vehicle. If an obstical is detected, the controller receives the signal and transmits it to the speaker
• The speaker emits long intermittent beeps inside the vehicle at 4-6 feet, and as you move closer to the obstacle, the beep increases in frequency. When you are 1 foot away from obstacle, the sound is continuous
• Power is supplied by tapping into reverse lights which means that the device is only on when you are in reverse.

Features
1. Accurate measurement
2. High sensitivity, wide detection range and small blind area.
3. sound alarm
4. Apply to most cars and be easy of installation.

Specifications
1. Operate voltage: DC 12V
2. Power consumption: 3.5W
3. Operate temperature: -20°C ~ +60°C
4. Detection distance: 1.5 ~ 6 feet

INCLUDED IN PACKAGE
• 4 22 mm sensors,, controller, drill bit, and owners manual/installation instructions
 
Optional Displays
DT-104 sensor system DT104 product shot dt104 sensor shot 2


DT 104 install diagram
dt104 distance display

Note:
• Please read the audible only backup parking sensor manual carefully before using the product.
• This audible only backup parking sensor system is designed to be an aid and should not replace the need to drive carefully. Under no circumstances will the manufacturer or supplier accept any responsibility or can be held liable for any direct or indirect, incidental or consequential damage, or for injuries resulting from installing or use of this system.
• Reverse Backing Systems is not in charge of any extra promise getting from other dealers.
• Whilst every precaution has been taken in the preparation of this publication, Reverse Backing Systems does not warrant the accuracy or completeness of the information in this publication and Reverse Backing Systems reserves the right to alter specifications without notice.
• To the extent permitted by law, Reverse Backing Systems excludes all liability, including negligence for any loss incurred in reliance on the contents in this publication.
Warning:
• Please practice reverse parking using different obstacles to grasp the audible only backup parking sensor's performance.
• Though the minimum detecting distance is 1.5 feet, it is still recommended to keep enough space to stop your car. Considering the cars’ inertia, it would be better to stop your car when the distance is shorter than 2 feet.
• The reverse speed should be less than 3 miles/h.
About us | Products | Features | Vehicle Status Check | Site map | Shipping/Warranty | FAQ | Dealers
Copyright © 2005-2006 Reverse Backing Systems. All Rights Reserved. Backup Sensor, Parking Sensor.